Tips & tricks 8 :Making headlights

View previous topic View next topic Go down

Tips & tricks 8 :Making headlights

Post  Ruben Lopez on Sun Nov 23, 2008 9:42 pm

Hello fellow modelers.

In this little SBS I’ll show you how to make realistic headlights for your armored vehicles.

The materials you’ll need are:
Drill bits
A Nutella wrapper
Clear styrene
A punch and die set or a leather puncher (or anything that can cut disks)
Your trusty hobby knife
Any glue that dries clear (PVA or Testors windows making glue are good choices)

Ok, lets begin...

First step is to drill the models headlight. It doesn’t have to be a very deep hole; a 1/8 of an inch is enough. Measure the diameter of the lens of the headlight and use a drill bit slightly smaller in diameter to drill the lamp. The idea is to leave a ledge for the lens to rest on.


Next, using the leather puncher cut a disk from the Nutella wrapper slightly larger than the hole you just drilled. Now with your hobby knife make a cut in the disk from the center to the edge. It doesn’t have to be the exact center of the circle but the closer the better.


Insert the disk into the hole you drilled in the headlamp and gently push it all the way back. The cut in the disk will cause it to form a cone just like the real headlights. Here is an example.


Ok we are almost finished; the only thing remaining is to cut the lens for the light. For this you can either use your punch and die set or the leather puncher (I used the later) but try to use the closest size available to the diameter of the headlight.


Here is the lens.


Now put a little glue in the ledge and place the lens in the lamp. Wait for it to dry and there you have it, a realistic looking headlight for your favorite AFV.


For the bulb itself you can use any round transparent object you have at hand as long as it's the right size, or you can stretch some clear sprue to the desired width and cut little pieces from there.

Now, in case you are wondering how are you going to paint the lamp without damaging the lens I suggest placing a drop of liquid masking in the lens right before you paint or drill the lamp and leave the rest for after you paint.

Hope it is useful to you.
Ruben

Ruben Lopez
seasoned veteran
seasoned veteran

Posts : 454
Join date : 2008-11-22
Age : 50
Location Location : Puerto Rico

Back to top Go down

Nice article

Post  Panzer on Wed Nov 26, 2008 10:04 pm

Nice article, post more ideals like this.
Panzer

Panzer
General
General

Posts : 980
Join date : 2008-11-17
Age : 55
Location Location : O'Fallon MO, U.S. of A

http://www.network54.com/Forum/526495/

Back to top Go down

Very cool !!!

Post  Panzerserra on Sun Jan 11, 2009 12:53 am

Hey, Driver !!!!

How do you do ???

Great forum with great people !!!

regards, from Brazil !!!

Panzerserra
Be nice to me I am new
Be nice to me I am new

Posts : 51
Join date : 2009-01-11
Age : 57
Location Location : Anapolis - Goias- Brazil

http://tempodefolga.com.br/serra01.htm

Back to top Go down

Re: Tips & tricks 8 :Making headlights

Post  Sherman 18 on Fri Mar 06, 2009 6:49 pm

Thats a great tip. Thanks

Sherman 18
Tank Commander
Tank Commander

Posts : 892
Join date : 2009-02-28

Back to top Go down

Re: Tips & tricks 8 :Making headlights

Post  Sponsored content Today at 11:47 am


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum